Does your Quooker respond poorly when you press twice and turn the control ring? A corroded magnet could be the cause. Here, we show you how to replace the magnet in the control ring. This guide is based on a post by Reddit user "Mental_Buffalo9461".
The method is based on a Quooker model from 2019. Other models may be assembled differently, so this guide may not apply to your particular Quooker.
What you will need
- . These are the same dimensions as the magnet already fitted in the Quooker tap.
- One or two flat-head screwdrivers.
- Masking tape or a cloth to protect the surface.
About the magnet: The magnet is available with either gold or nickel plating. This does not affect how long the magnet lasts, so you can choose either version.
Step-by-step instructions
- Disconnect the power. The tank may still contain boiling water. Do not disconnect any hoses or open the tank.
- Protect the surface of your Quooker. Place masking tape or a cloth between the tool and the metal.
- Gently lift the metal cover. Work evenly around the edge. Stop if you encounter strong resistance or if the black plastic insert starts lifting with the cover.
- Replace the magnet. It sits inside the black plastic ring. Remove the old magnet and any loose debris.
- Reassemble the ring. Make sure the two internal indentations in the metal cover line up with the magnet's position.
- Reconnect the power and test. Keep your hands away from the water stream. Check that the tap turns on and off normally.
