Make your own fridge magnets
Which magnet suits your project?
- Self-adhesive disc and block magnets are practical for designs with a flat back where the adhesive can bond securely. Choose a size that can be hidden behind the decoration.
- Ferrite magnets can be glued to the back of wooden figures or dry clay decorations, for example. They come in different diameters and thicknesses, so you can choose a magnet to suit the piece.
- Self-adhesive magnetic tape can be cut into pieces and used behind lightweight, flat designs such as card and printed pictures. The adhesive side attaches to the design, while the magnetic side faces the fridge.
How to make a fridge magnet
- Finish your decoration. Shape, paint or cut out your design. Allow clay, paint and any varnish to dry completely according to the manufacturer's instructions.
- Find a suitable position. The back must provide a stable contact surface for the magnet. The magnet needs to reach the fridge door without edges or uneven areas holding it away.
- Attach the magnet. Use the self-adhesive backing on a suitable, clean and dry material, or choose a glue compatible with both the magnet and the decoration.
- Allow the bond to cure. Follow the adhesive's instructions before putting any load on the magnet.
- Test the finished magnet. Check that the decoration stays in place without sliding and that the magnet does not come away from the back when you remove it from the fridge.
Ideas for personalised fridge magnets
Make small fruits, flowers or letters from air-dry clay, paint a wooden figure, or mount a printed photo on a piece of sturdy card. You can also create a matching set with the same colours or theme as a personalised gift.
Keep the decoration relatively light and plan for a flat back from the start. For photos, it is a good idea to use copies, as glue and self-adhesive materials remain attached to the picture.
How strong does the magnet need to be?
The magnet must support both itself and the decoration on a vertical surface. If it also needs to hold a reminder, test it with the paper between the magnet and the fridge.
The stated pull force is measured by pulling directly away from a steel surface and is not the same as the load the magnet can support on a fridge door. Avoid choosing an unnecessarily powerful magnet: the adhesive bond and the decoration must withstand being removed again.
Test the fridge door with a magnet first, as not all fridge fronts attract magnets. If you are unsure which magnet to choose, we can help based on your decoration's weight, material and size.