Magnets for Knife Holders
Planning to build your own magnetic knife holder? Here you'll find neodymium magnets in different sizes and strengths for your project. Choosing the right magnet depends mainly on the distance between the magnet and the knife, as well as the weight of the knife.
We've tested a range of disc and block magnets using a 210 g chef's knife at different distances. Use the results as a starting point when choosing your magnets, and always test your finished holder with your own knives before use. See our guide with test results and magnet configurations.
Which Magnets Should You Choose for a Knife Holder?
Start by measuring the distance from the front of the magnet to the knife blade. If the magnets will be concealed inside wood, use the thickness of the material covering the magnets rather than the total thickness of the wood. Include any gaps or additional layers between the magnet and the knife.
Next, compare this distance with our test results. A magnet's stated holding force in kilograms does not tell you how well it will hold a knife through another material. The magnet's shape, the distance and the configuration all affect its performance. A stronger magnet is not necessarily the most practical choice if it makes the knife difficult to remove.
Examples from Our Magnet Tests
We tested the magnets using a 210 g chef's knife, increasing the distance between the magnet and the knife in 1 mm increments. The table shows three examples where the knife stayed securely in place without sliding and was still easy to remove.
| Magnet | Tested configuration | Distance with good results |
|---|---|---|
| Disc magnet 15×8 mm | Single disc magnet | 2–3 mm |
| Disc magnet 20×10 mm | Single disc magnet | 3–6 mm |
| Disc magnet 35×5 mm | Single disc magnet | 3–7 mm |
These distances apply to the knife and magnet configurations used in our tests. They are intended as guidance, and your results may vary depending on your knives and knife holder. Our complete guide covers additional magnets and also identifies distances where the knife was held too firmly or where the magnet could not hold it.
Explore more magnet sizes and see the complete test results.
Disc Magnets or Block Magnets?
Disc magnets have a round shape that fits into drilled holes in wood. They can be a practical choice when you want designated positions for individual knives. Choose the diameter and thickness based on the space available inside the holder and the distance to the knife blade.
Block magnets have a rectangular shape and can be fitted into a routed groove in the wood. In our guide, block magnets were tested individually and in pairs, with two magnets positioned horizontally, one above the other. The results vary between configurations, so it is important to choose based on the arrangement you intend to use.
Test Your Knife Holder with Your Own Knives
Knives vary in weight, blade shape and material. First, check that the knife blade is attracted to a magnet. Then test the planned distance and magnet configuration with the knives you intend to use with your holder.
We recommend making a test setup before fixing the magnets permanently in place. Try different distances and choose one where the knife stays securely in position but can still be removed easily from the magnetic knife holder.
Not sure which magnet to choose? Contact us and we'll help you find a suitable option. If you find a magnet that isn't included in our test results, you're also welcome to ask us to carry out a holding strength test.