Most people are familiar with fabrics, such as tablecloths and curtains, moving at the slightest wind or movement. Therefore, this article will look at how the following problem can be solved:
For example, if it's a tablecloth lying on a table that has a metal frame, the solution is usually straightforward. You just put a magnet on top of the fabric so that the magnet sticks to the metal frame. You can put a magnet in each corner and possibly some along the side if it's a long table. This solution is suitable for garden tables as they often have a metal frame.
The same can be done with curtains in caravans, for example, if the frame around the window is made of metal. Again, simply insert a magnet between the curtain and the metal frame.
If the table or window doesn't have any metal for the magnet to stick to, you'll have to find something else. If it is possible to screw something down, you can mount a small metal plate that the magnet can stick to. If you prefer not to screw anything down, you can also glue the metal plates in place or use very thin metal plates that come with glue on the back. However, if you use strong magnets that are taken off and on the metal plate, the glue will eventually get "tired" and the metal plate will fall off. This is not usually a problem, but it can be for some.
Choosing magnets
Choosing the right magnet depends on several things. A small to-do list can be:
- Where will the magnet be used? Is it cold, hot, humid, outside?
If it's a humid environment, rubber magnets are best because the magnet is protected. If the magnet is kept dry, you can use regular neodymium magnets with nickel plating. - How strong should the magnet be?
The strength of the magnet depends on how well you want the fabric to stick and the distance between the magnet and the metal. The longer the distance, the stronger the magnet needs to be. In most cases, a strength of between 2-4kg will be sufficient. If the fabric is very thin, you may be able to make do with a strength of 1kg. - What size should the magnet be?
The size of the magnet is entirely up to you. Small and flat magnets are easy to hide, but they can be a little difficult to remove if your fingers can't grip the magnet (this is only a problem if you can't remove the magnet by pulling the fabric/curtain). Larger magnets are more visible, but they can be easier to remove. This is especially advantageous if you choose a strong one that sticks well. Again, rubber magnets are good as the rubber makes it easy to grip the magnet, even if the magnet is not that big.
Magnets used in the project
Below we have selected some magnets that we or our customers have found to work well. There may well be other magnets that work just as well or better for your project. You can therefore take a look at all the other magnets we have and write to us if you have any questions.
